How to Read a Tape Measure in Cm
A tape mensurate, sometimes likewise chosen a measuring tape, is a roll of metallic record with evenly graduated markings used for measuring. The tape is oftentimes yellow and rolled in a plastic case.
Tape measures are commonly used in construction, architecture, edifice, dwelling house projects, crafts, and woodworking. They normally come in lengths from six feet to 35 feet long.
Tape measures may accept measurements in royal and metric, imperial-but, or metric-only.
How to Read an Regal Tape Measure
On an regal record measure, the markings represent lengths in inches and fractions of an inch.
Each large tick represents one inch (1″), and the ticks between represent the following fractions: i⁄16", 1⁄8", 3⁄16", ane⁄iv", 5⁄sixteen", three⁄viii", 7⁄16", ane⁄2", 9⁄16", 5⁄8", 11⁄xvi", 3⁄four", 13⁄16", 7⁄8", and fifteen⁄xvi".
To read a tape measure, find the number next to the large tick, and then observe how many small ticks past information technology the measurement is. Add the number adjacent to the large tick with the fraction to get the measurement. For case, if your five ticks past the number 4 tick, and so the measurement is iv 5⁄16".
Reading a tape mensurate is merely like reading a ruler.
What Exercise All the Markings Mean?
To read a measuring record, you need to understand what all the markings hateful. The large ticks are 1″ apart, and the pocket-size ticks are fractions of an inch. The numbers side by side to the large ticks indicate the altitude from the end of the tape in inches.
The ticks in the heart of the inch markings are half-inch markings, and there is ane⁄2" between each inch marker and half-inch marking.
The ticks betwixt the inch markings and half-inch markings are quarter-inch markings. In that location is ane⁄4" between the one-inch marker and the quarter-inch marking. There is 1⁄iv" between each quarter-inch marking and the half-inch marking.
The 2d smallest ticks are eighth-inch markings, and at that place is i⁄viii" betwixt the eighth-inch markings and the quarter-inch markings and one-inch markings.
The smallest ticks on a tape measure are sixteenth-inch markings. There is 1⁄xvi" between each marker on the record measure.
Inch Fractions for Each Mark
See the decimal equivalents for all the fractions on a tape measure. You might too similar our inch fraction figurer for converting between decimal and inch fractions and getting decimal equivalents.
Inch Fraction, Decimal and Millimeter Equivalents
| Fraction | Decimal | Millimeters |
|---|---|---|
| 1⁄16" | 0.0625 | 1.5875 |
| 1⁄8" | 0.125 | 3.175 |
| 3⁄16" | 0.1875 | 4.7625 |
| 1⁄4" | 0.25 | 6.35 |
| five⁄xvi" | 0.3125 | 7.9375 |
| 3⁄viii" | 0.375 | nine.525 |
| seven⁄16" | 0.4375 | xi.1125 |
| 1⁄2" | 0.5 | 12.7 |
| nine⁄16" | 0.5625 | 14.2875 |
| v⁄viii" | 0.625 | 15.875 |
| 11⁄xvi" | 0.6875 | 17.4625 |
| 3⁄4" | 0.75 | nineteen.05 |
| 13⁄16" | 0.8125 | 20.6375 |
| 7⁄eight" | 0.875 | 22.225 |
| 15⁄16" | 0.9375 | 23.8125 |
| i″ | i | 25.4 |
How to Read a Metric Record Measure
Metric tape measures have similar markings to imperial models, simply the markings represent centimeters and millimeters. The larger markings on a metric tape with numbers are the centimeters and the smaller marks are millimeters.
Considering at that place are 10 millimeters in a centimeter, in that location are 9 millimeter tick marks betwixt each centimeter on the tape.
On a metric tape measure there is 1 cm between each large numbered tick marking and there is one mm betwixt each smaller tick that is not numbered.
How to Use a Tape Measure
Get the almost out of your measuring tape with the following tips for using them.
How to Utilize the Tape Lock
Almost all tape measures have a lock that will go along the record measure from recoiling. This is useful if you need to take tension off of the tape measure or if yous need to set the tape mensurate down while it is extended.
On this Stanley FatMax model, the slide lock is the big black button on the top. Sliding this down will lock the tape open to forbid recoil.
Every bit an Amazon Acquaintance we may earn commissions from qualifying purchases from Amazon. Learn more than
How to Use the Sliding Hook
A signature feature of a tape measure is the hook on the end of the tape. This serves a dual purpose to foreclose the tape from rolling into the instance and allow hooking onto the end of items being measured.
You might notice that the cease hook slides or moves simply a bit. This is by design to business relationship for the thickness of the hook, which allows the tape measure to be accurate when hooking onto a surface and too when butting the end up to a surface.
Be mindful of tape measures that do not accept a sliding hook as they will not be as accurate.
How to Utilize the Framing Stud Hints
About tape measures have red markings at certain intervals: 16″, 32″, 48″, 64″, then on. These numbers are pregnant in that they point the heart of a stud on for 16″ on center framing.
Some tape measures as well characteristic a blackness diamond symbol intervals that are nineteen.2″ apart. These diamonds are also used to indicate framing intervals for a wider stud or joist spacing.
How to Utilise the Blast Grab
The hook on a tape measure oftentimes has a small hole or groove in it. This is actually used to permit hooking the hook on a boom or spiral, so it doesn't slide off when making long measurements.
This is specially useful for longer measurements, such equally measuring beyond the length of a room or patio.
On the hook above, the oval cutout is used to hook onto a nail or screw.
Use the Sides of the Claw
Some tape measures, peculiarly framing tapes, take large hooks that can exist used to grip surfaces on the side of the hook. Using these can improve the claw's gripping power and improve the accuracy of measurements since the tape measure will not need to exist twisted to read the markings.
How to Cull the Correct Tape Measure
In that location are many tape measures on the market, and many serve very dissimilar purposes. When choosing the one that's correct for you, consider what y'all'll be using it for, how long you need it to be, and how much you'd prefer to spend.
When choosing a tape measure, consider the post-obit features to find a record measure that's right for you lot and your needs.
- Size and ease of reading the markings
- Imperial or metric markings
- Length of the tape
- Concrete size of the tape
- Standout length for measuring longer lengths
- Locking features
- Durability
- Toll
Come across our review of the best tape measures to detect which tape measure we establish to be the best and for reviews on several leading tape measures on the marketplace. In a compression, you tin can fifty-fifty print a tape mensurate to salvage a trip to the shop.
Source: https://www.inchcalculator.com/how-to-use-tape-measure/
0 Response to "How to Read a Tape Measure in Cm"
Postar um comentário